Gigabox Sense ironCUBE®-CAN

Gigabox Sense ironCUBE®-CAN

GIGABOX Sense ironCUBE®-CAN

As a member of the GIGABOX family from Akkodis, the ironCUBE®-CAN is ideally suited as a current measurement device. It is especially the best choice for quiescent current measurements in automotive electrical systems due to its extremely low zero-point drift and high resolution.

At the same time, the system can transmit and measure high peak currents, such as those that occur during engine starting.

The ironCUBE®-CAN is therefore the right measurement tool for both development and verification of compliance with specifications.

Category:

Compact and Flexible

Thanks to its compact design, the ironCUBE®-CAN can be easily installed in tight spaces, such as directly at the car battery.

Technical Data

  • Measurement range: ±750 A, ±60 V
  • Resolution (at ±750 A):
    • ±0 to ±37 A: 1.25 mA
    • ±37 to ±75 A: 2.5 mA
    • ±75 to ±150 A: 5.2 mA
    • ±150 to ±750 A: 20.8 mA
  • Voltage range ±60 V: 10 mV resolution
  • Zero-point noise: < 25 mA peak (with open terminals)
  • Temperature drift: ~100 µA/°K
  • Additional measurement ranges available on request: 100 A, 500 A, 1500 A

Features

Akkodis can produce measurement technology according to customer requirements with all connector variants.

• Typ 1 80A
• Typ 2 32A
• CCS1 (Combo1)
• CCS 2
• Chademo 300A
• NACS




Added Value

BoB – AC-Typ1-Prüfbox-80A und AC Typ2 Prüfbox

  • PeliCase housing
  • Highly mobile (20KG)
  • Very robust
  • Electrical locking of the plug with feedback and emergency release function
  • Visualization of all important parameters via 7” touch display
  • Emergency stop switch (CP interruption)
  • Measuring taps for L1, L2, L3, N, CP, PE and PP
  • Inductive current measurement
  • Designed for 32A/380V and 80A/250V
  • Measurement and continuous manipulation of proximity detection
  • Short circuit PP-PE
  • Interruption of the individual phases and N conductors
  • Interruption of the PE protective conductor to the charging station and vehicle

    • BoB – DC-CCS1-Prüfbox-500A und -CCS2-Prüfbox-500A

  • PeliCase case 1650
  • Highly mobile (32KG)
  • Very robust
  • Permanent temperature monitoring of the DC contacts with advance warning function and shutdown in the limit range
  • Limit range freely adjustable (currently programmed: 90 – 130 degrees)
  • Manipulation of the actuation lever on the charging plug (latching lever)
  • Electrical locking of the plug with feedback and emergency release function
  • Visualization of all important parameters via 7” touch display
  • Emergency stop switch (CP interruption)
  • Measuring taps for DC+, DC-, CP, PE and PP
  • Inductive current measurement
  • Designed for 500A/1000V
  • Measurement and continuous manipulation of proximity detection
  • Interruption of the PE protective conductor to the charging station and vehicle

References

  • BoB test boxes for CCS1, CCS2, ChaDeMo, GBT, NACS
  • Brake cube test bench solution
  • Test stand solution BRS measuring case
  • Infotainment test setup
  • PV simulation with HEMS functions
  • Mechanical components
  • Vehicle conversion

Workshop

Contact

Nikolas Billebault
Mail: nicolas.billebault@akkodis.com

Peter Konschu
Mail: peter.konschu@akkodis.com
Phone: +49 8458 3488 2283

Hasib Hadziric
Mail: hasib.hadziric@akkodis.com

 

Precision mechanics workshop

  • CNC-Fräsmaschine
  • Drehbank
  • Abkantbank
  • Schweißgerät
  • Ständerbohrmaschine
  • Tischfräsmaschine
  • Formatkreissäge mit Absauganlage
  • 3D-Drucker
  • diverse el. Handgeräte

 

Electrical laboratory

• Kabellegetisch
• Großes PIN & Steckersortiment
• Großes Kabelsortiment
• Großer Fertigungsraum
• Aufbau von Messboxen
• HIL-Aufbau
• Schaltplan- und Konzepterstellung

Related products